Product List
Share to:

Paco Solar Charge Controller

AT (PWM) Solar Charge Controller (40A-60A)
Feature:  
◆  LCD display PV charge, battery and DC loading condition.
◇ Protection against over charge, over discharge, over load and anti-thunder.
◆ PWM charging mode, DC mode save cost.


Product Parameters
AT Specification
Rated Current 40A/50A/60A
 Rated System voltage 12/24V(auto recognition),48V
PV input voltage range 12V System: 15V-44V;24V System: 30V-44V;48V System: 60V-88V
Max PV Input Voltage(At 25℃) 12V/24V System:50V; 48V System:100V
PV Array Maximum Power 12V System:140W,280W,420W,560W,700W,840W; 
24V System:280W,360W,840W,1120W,1400W,1680W;
48V System:560W,1120W,1680W,1120W,2240W,3360W
Battery type Lead acid battery, deep cycle battery, gel battery etc(Battery type base on user charge specification)
Floating voltage 13.8V/ Single battery
Charge voltage 14.2V/Single battery
Charging protection voltage 17V/Single battery
Battery overdischarge voltage 10.5V/Single battery
Charging mode PWM pulse width control
Charging method Three stages :constant current; constant voltage; floating charge
No low loss <5mA
Charging circuit voltage drop ≤0.20V
Disharge circuit voltage drop ≤0.15V
Display LCD
Thermal method Natural heat dissipation
Type of mechanical protection IP20
Operating temperature -10℃~40℃
Storage  temperature -20℃~60℃
Elevation <5000m,(Less solar panel when exceed 2000m)
Humidity 5~95%(No condense)
Protect the circuit over-charge, over-discharge, short circuit and over-load protection
Machine size (L*W*Hmm) 185*107*55
Package size (L*W*Hmm) 195*59*114
N.W (Kg) 0.64
G.W (Kg) 0.72
Note: All specifications are subject to charge without prior notice